May 2020

Another month without an operating session.

However I have been building a structure for the Adelaide Model Railroaders layout “the Southern Central RR”

Below are progress photos of my build of the Rolling Mill for the steel mill on the SCRR. The rolling mill is a Walthers kit.

Rolling mill 1

 

Rolling mill 2

 

Rolling mill 3

 

Rolling mill 4

 

Rollingmill 5

 

Rolling mill 6

 

Rolling mill 7

The completed Rolling Mill is 32 inches long.

APRIL 2020

There was no operating session held on the Kanunda & Emu Flat railway this month and all operating sessions have been suspended until social distancing rules have been revoked.

However I have completed the Walthers electric furnace that I have built for the Adelaide Model Railroaders. After consulting with then AMR’s industry committee I decided to call the steel mill RHP Steel co after three club members who got this project started. I have called it converter no 2 because it is used to convert iron to steel but it would be unusual for an integrated steel mill to only have an electric furnace. It would have a basic oxygen furnace or perhaps an open hearth as well as the electric furnace which would be used to produce specialty steels. So At RHP Steel no1 converter would be a BOF which we do not have the space for so by naming the electric furnace converter no2 it is implied that there is another converter which would be a basic oxygen furnace.

DSC04669

Above the completed RHP Steel converter no 2.

Other club members have built the Blast furnace and coke ovens. I have just begun work on the rolling mill and that will complete the main structures for RHP Steel co.

Stay safe and keep well

Cheers Ken.

Operating session March 2020

THE TUESDAY NIGHT MAIL TRAIN

FOR THE OPERATING SESSION ON THE KANUNDA AND EMU FLAT RAILWAY ON TUESDAY MARCH 3 2020

WORKING ON THE K&EFR

I an still working on the Walthers electric furnace for the club layout’s steel mill. See below.

P1050647 (1)

Also I made a brick signal tower to be used a stopper for one of the Adelaide Model Railroaders layout’s lift-up bridges.

AMR newsletter 2-20

Above: The signal tower at Atkins on the Southern Central RR. I made a video of how I built the signal tower.

THE SESSION.

The March session got away on time with David as road crew number one and Peter road crew number two, Rod was the Kanunda YM, Sol Hostler and myself controller.

All of the time tabled trains ran fairly well on time despite a few mishaps this session. We could not repeat two perfect sessions in a row.

The first mishap happened to the Adelaide Super-freighter when it was in Kanunda. The transfer goods had an order to proceed to Cooper, stating that the train order would not come in to effect after the departure of the Adelaide Super-freighter, but the transfer goods driver did not read his train order properly, and set off before the Super-freighter, derailing on the cross-over at the western end of Kanunda which had been set for the Super-freighter to proceed through on the main-line. The transfer goods coming out of the yard. It was not too bad a derailment and the Super-freighter was only held up for a few minutes.

Later Peter S drove the Adelaide Jet up into the Kanunda engine shed. Peter has done this before so this move has become known as doing a Peter S. Once again the Jet was only delayed for a few minutes.

For some unknown reason 961 on the down livestock train derailed coming into Wooldowie.

Sol did a great job as Hostler. He said that the secret to the hostler’s job is to to keep on top and think ahead. Gating the Up Roadside goods out on time is always a challenge. Sol set out it’s cars in track 4 well ahead making this job quicker. Sol also pointed out to me a couple of errors in the hostler’s train list.

All of us enjoyed the session which finished on time so we were able to relax and enjoy our cake and tea or coffee.

P1050649

Above: 846 arrives at Wooldowie with the Emu Flat passenger while 842 shunts wagons with the up Myrtle Springs goods.

P1050650

Above: Kanunda: 840 with brake van is sitting on the passing siding after returning with the Maranalgo goods.  949 with the down roadside goods is coming to a stop in the passing siding. The roadside goods will set out and pick up wagons at Kanunda. 

P1050652

Above: 949 and the roadside goods have pulled up and are checking their way bills. At the far right 840 can be seen escaping through the yard heading to the kanunda MPD.

P1050653

Above: 840 and brake-van escaping while 503 shunts the Kanunda goods shed.

P1050654

Above: YM shuffles way-bills while the roadside goods driver moves his train forward.

P1050657

Above: 949 moves forward to set out three wagons in the Kanunda yard.

P1050659

Above: The down Overland has arrived and overshot the platform while 949 picks up two wagons.

P1050660

Above: 949 must quickly move the two wagons back on to the roadside goods before the Overland departs. We can see the Overland’s driver intently looking at the fast clock.

P1050661

 Above: Now 949’s driver can take his time shunting at Emu Flat after the frantic action at Kanunda.

P1050667

.Above: 961 has detached a cattle wagon for Kanunda. 503 is waiting to take hold of the CS cattle wagon which it will place at the cattle pens. As usual there is plenty of wagons in Kanunda yard.

P1050670

Above: At last 961 propels it’s last three cattle wagons to the cattle pens at Emu Flat.

So we had another enjoyable and eventful session on the K&EFR. Even though similar trains are run each session no two sessions are the same.

Cheers Ken.

Operating session – Feb 2020

THE TUESDAY NIGHT MAIL TRAIN

FOR TUESDAY FEBRUARY 4 2020 ON THE KANUNDA & EMU FLAT RAILWAY

WORKING ON THE K&EFR

P1050620

Above: Peter K has been experimenting with making trees for the Adelaide Model Railroaders layout from dried flowers from his garden. To make these pines trees Peter applied green flock to the dried flower stems with cheap hair spray. He gave the first fifteen to me to try for appearance and durability. Nine of then trees are in this photo. I will show the other six in other photos.

P1050600

Above: I have made a little bit more progress on the Walthers Electric Furnace kit that I am building for the Adelaide Model Railroaders.

THE SESSION

February four was the first session for 2020 after a two month gap. We had six operators, Sol road crew 1, Peter S and John road crew 2, Rod as per usual Kanunda Yard master, David Hostler and myself controller.

We got away to a some what late start after the computer used for the 4 to 1 fast clock shut down incorrectly. I accidentally knocked out the plug while starting the clock. Fortunately this hiccup did not flow on for the rest of the session. Once started, the session ran really well. All locos ran very smoothly. We only had one derailment after someone forgot to reset the crossover to normal at Emu Flat after passing through it. That event caused the Melbourne Jet which left Cooper right on time to arrive in Foster a few minutes late. The only variation to the advertised time tables. All cars and car cards finished in their correct spots. 

Last session we decided that whoever took the Hostler job should always do two consecutive sessions. The idea being that by the second session he should have a better handle on the job and hopefully remember the job better he next time that he is required to be hostler. That idea seemed to work even though it was two months since the last session. David was able to remember some of the more difficult moves that the hostler is required to make so he did have a better handle on the job. This helped to make the session the success that it was. 

This session we rescheduled the down Myrtle Springs goods to depart from Kanunda before the up Roadside goods departed from Foster instead of vice versa. The reason being to allow the hostler more time to prepare the up Roadside goods for departure.

It appeared that this change only moved the problems over to the Kanunda yard master. What happened this time was that when the controller issued a train order to the down Myrtle Springs goods’ crew headed

Train no 403  engine 842

at Kanunda

saying

Proceed to Myrtle springs

Shunt at Wooldowie

The down Myrtle Springs goods’ crew , Sol, said “what am I to shunt at Wooldowie I know that there are no pick ups at Wooldowie and I have nothing to set out there.”

I knew that the down Transfer goods recently  had brought a wagon into Kanunda that had to be forwarded on to Wooldowie. The down Myrtle Springs goods passes through Wooldowie on it’s way to Myrtle Springs. It appears that the Kanunda YM had insufficient time to get Wooldowie loading on to the earlier departing down Myrtle Springs goods. I feel that it should not be the controllers job to make sure that the consist of trains is correct. Result being that we will revert to the original order for those two trains. The up roadside good crew will have to remain patient for their train to be prepared by the hostler. These two trains are among the last four trains of the session and there is plenty of gap before the last train, the time tabled Up Mt Gambier goods. Sometimes if all has gone well as happened Tuesday there is a half hour fast time wait before its departure of 1334 from Foster. 

P1050603

Above: Three of Peter K’s pine trees in the back ground. Trainorama 830 class, number 858, arriving at Maranalgo to pick up loaded cattle wagons. The green open wagon is an idler wagon to be placed between the brake van and the smelly cattle wagons for the return journey to the abattoir at Gepps Cross.

P1050604

Above: The other three pine trees are on the hill behind Footner cottage at Kanunda. 858 has picked more cattle wagons at Kanunda and is now headed to Cooper (staging) from where it will proceed to Dry Creek yard and finally the cattle wagons will arrive at Gepps Cross abattoir.

P1050605

Above: 938 a Lima dummy and powered Austrians 705 power through Wooldowie with the loaded stonie.

P1050607

Above: Maranalgo, and Powerline 840 on the Maranalgo goods is about pick up an open wagon of mallee roots from Sol’s Firewood. The empty WAGR open will be left to be filled with mallee roots.

P1050610

Above: The late running Melbourne Jet after derailing on the incorrectly set crossover at Emu Flat.

P1050611

Above: The two locos on the Melbourne Jet seen crossing Five Mile Creek are green BL29 a Powerline model fitted with a Fiddle Yard mechanism and Orange and Grey G511 a dummy Powerline loco. Behind the train is Penstone limestone quarry and in the distance Rod can be seen yard mastering at Kanunda.

P1050614

Above: The down roadside goods has arrived at Wooldowie.

P1050615

Above: Austrians X54 and Lima dummy 950 on the Adelaide Jet cause the down roadside goods to pause it’s shunting at Emu Flat while it proceeds through on the main line.

P1050616

Above: Auscision 830 class 842 sits in the yard at Kanunda waiting for the down Myrtle Springs goods to be made up by the Kanunda yard master.

P1050617

Above: Engine and van (EV) Lima dummy 930 class 942 and Trainorama 961 pass through Wooldowie on the mainline on the way to Emu Flat where they will begin the run as the up grain extra to Gillman Yard (Cooper staging).

P1050618

Above: 961 and 942 on the up grain extra run around the AHGX wheat hoppers that they have picked up at Emu Flat to pick up another four AHGXs at the Wooldowie silos.The AHGX hoppers are cheap Powerline hoppers that I have kit bashed.

P1050619

Above: Trainorama 930 class Alco, 949 running B end forward passes King Forrest and the Cooper Motive power centre as it arrives back into Cooper staging with the up roadside goods.

The session ended a little before 2200 hours. Then operators enjoyed tea or coffee and some cake. All in agreement that it was an enjoyable session.

Cheers Ken.

 

Dec 2019 operating session video pt 3

KANUNDA & EMU FLAT RAILWAY

The K&EFR is a fictional fourteen kilometre stretch of the mainline between Adelaide and the border with Victoria. This line then carries on to Melbourne.

This video picks up the session about half way through. 

Mustard pot 830 class 847 on the transfer goods has just taken six wagons from Kanunda yard back to the west end staging representing Adelaide and environs. After the Hostler ( staging operator ) has exchanged loading the transfer goods will return to Kanunda with another six wagons.

Then the down roadside goods arrives at Kanunda, from Cooper (staging) and sets out loading for Kanunda and the Myrtle Springs branch. At Kanunda the down roadside goods also picks up for stations further down, Wooldowie, Emu Flat and Foster. Then it travels on to Foster setting out and picking up at Wooldowie and Emu Flat. At Foster (east end staging ) the Hostler will exchange the roadside goods loading before it returns to Cooper (west end staging) as the Up roadside goods.

Following the roadside goods is the grain extra from Cooper which sets out wheat hoppers at Kanunda, Wooldowie and Emu Flat. Then returns to Cooper as an up engine and van. 

The up Tank train travels through from Foster to Cooper.

The down Myrtle Springs goods is made up at Kanunda and sets out loading at Wooldowie on it’s way to Myrtle Springs via Jimba Jimba Junction.

The up Mt Gambier goods the last train)  stops at Kanunda to pick up loading for Adelaide (Cooper)

Not shown in this video is the Adelaide Jet a through train which departs Foster at 1044 hours.

I hope that this explanation helps to understand the video.

For a track plan and more information please look at about the Kanunda & Emu Flat railway above.

December 2019 operating session part 2

 

DECEMBER OPERATING SESSION PART 2

The session started at 0600 by the 4:1 fast clock. Part 2 of this video series picks up the action at 0720.

0720 the down livestock train 325 departed from Cooper (west end staging). It originally came from Dry Creek yard Adelaide with four empty CS cable wagons from the Gepps Cross abattoir. 325 sets out two cattle wagons at Kanunda and two at the branch line terminus of Maranalgo. Then it returns as 326 up engine and van (cab hop to some) to Dry Creek via Cooper (staging). The cattle wagons will be loaded next day (next session) and will be sent to the Gepps Cross abattoir via Cooper. 

0747 the down empty Stonie train 301 departed from Cooper. It originally came from ICI chemicals Osborne Adelaide soda ash factory. It travelled to Emu Flat where it dropped off the empties and picked up a train of loaded hoppers for the return journey via Cooper as 302 up Stonie.

0821 the down Maranalgo goods train no 405 which was made up at Kanunda departs Kanunda for Maranalgo. After shunting the goods shed and Sol’s firewood it returns to Kanunda as up Maranalgo goods train no 404 with the loco B end forward, that is, long hood forward.

0903 Melbourne jet departed Cooper. The Melbourne Jet is a fast down through freight travelling from east end staging (Cooper) to west end staging (Foster) with out a stop.

0931 Adelaide super freighter departed Foster. The Adelaide super freighter is an up fast through freight travelling from east end staging to west end staging.

The through trains above travel between Adelaide and Melbourne.

For more information and a track plan please look at “about the Kanunda and Emu Flat railway” above.

Dec 2019 operating session Video

 

K&EFR DECEMBER OPERATING SESSION

All of the times shown on the video are from the 4:1 “fast” clock used during operating sessions.

To help understand what went on. The session started at 0600 (6am) “fast” time. 

The first train on the layout was 313 the down Mt Gambier goods which is said to have come from Mile End yard in Adelaide. 313 departed Cooper (west end staging) at 0606. 313 is a through train that has only one stop on the layout, Kanunda, where it sets out a cut if cars. From Kanunda it proceeds around the layout until it reaches Foster (east end staging), from where we assume it proceeds on to it’s destination at Mt Gambier in the south east of South Australia 466 Km from Adelaide.

102 the up Overland is the daily interstate passenger train that has departed from Melbourne and enters the layout through Foster at 0608. 102 is a through train that only stops briefly at Kanunda before proceeding to Cooper (east end staging), from where it is considered to be heading to Adelaide after its about 750 km journey from Melbourne.

The Mt Gambier goods and Overland are run to time table along with six other trains. All of the other trains which carry out shunting duties are run as extras using train orders.

The first of the extras is 402 the up Myrtle Springs goods which departs from it’s dedicated staging track and proceeds to its destination Kanunda carrying out shunting duties at Wooldowie on the way.

119 the down Emu Flat passenger (local timetabled passenger) comes from Adelaide and on the K&EFR it departs Cooper at 0655. 119 travels to Emu Flat stopping at all stations arriving at 0713 and after the loco has run around the train at Emu Flat it departs at 0725. Then as 120 up Emu Flat passenger it travels back to Cooper stopping at all stations arriving at 0742. 119 down Emu Flat passenger normally crosses 402 the up Myrtle Springs goods at Wooldowie.

The final train shown is 202 Adelaide Jet a fast through freight that does not stop on the layout. 202 runs to a timetable. It has travelled from Melbourne entering the K&EFR at Foster and is heading to Adelaide through Cooper.

For a track plan of the K&EFR please click on “About the Kanunda and Emu Flat railway” above.

Cheers Ken.